| Content |
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
Product Description
Product Description
Size: 11 x 9 inches / 28 x 23 cm
Product Features
The use of high quality silicon carbide material, suitable for the use of water mill and dry state. With excellent polishing effect and durability, greatly improve the working efficiency and service life!
Water-Resistant Sandpaper / Water-Abrasive Paper
This sandpaper set can be used in dry grinding and wet grinding, and there is no problem if it gets wet by water! The ground debris will flow out with the water without clogging, and the debris will not scatter all over, which can effectively inhibit frictional heat. It enables you to complete grinding and lapping effortlessly, providing you with premium use experience!
「Coarse」
80#-400#: Coarse grinding, generally used for the grinding of hard, thick and rough metal, wood and wall.
「Fine」
600#-800#: Used for the secondary grinding of coarse grinding, and products with low requirements can be directly grinded and formed.
「Very Fine」
1000#-1500#: Used for the fine grinding of metal, furniture, jade and plastic.
「Super Fine」
2000#-3000#: used for the polishing of automobiles, manicure and handicrafts.
5000#-7000#: used for the polishing of all kinds of high-end products to achieve a mirror effect.
Size of each sandpaper (L × W)
9 x 3.6 inches / 23 x 9.3 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
Grit Number
1000# x 5, 2000# x 5, 3000# x 5, 5000# x 5, 7000# x 5
1000# x 5, 2000# x 5, 3000# x 5, 5000# x 5, 7000# x 5
80# x 15
120# x 15
240# x 15
400# x 15
Grit Type
Super Fine
Super Fine
Extra Coarse
Extra Coarse
Coarse
Coarse
Wet / Dry
✓
✓
✓
✓
✓
✓
Size of each sandpaper (L × W)
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
Grit Number
600# x 15
800# x 15
1000# x 15
1200# x 15
1500# x 15
2000# x 15
Grit Type
Fine
Fine
Fine
Fine
Fine
Super Fine
Wet / Dry
✓
✓
✓
✓
✓
✓
Size of each sandpaper (L × W)
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
11 x 9 inches / 28 x 23 cm
Grit Number
2500# x 15
3000# x 15
5000# x 15
7000# x 15
Grit Type
Super Fine
Super Fine
Ultra Fine
Ultra Fine
Wet / Dry
✓
✓
✓
✓
【Product Description】 It is a large-sized sandpaper set composed of 600#×15pcs 230×280mm sandpapers. Focusing on the actual use needs of customers, we marked the corresponding granularity on the back of sandpapers and replaced the original packing with reusable zipper bags. It is our commitment to always striving to be the best.
【Professional Techniques】 We are specialized in producing abrasive tools and abrasives. This sandpaper set is made of premium quality silicon carbide abrasives and special papery substrate using advanced and professional highly electrostatic sand planting techniques. It is featured by anti-clogging, anti-static, good flexibility and high wear resistance. Using this sandpaper set, the grinding efficiency and service life can be immensely improved!
【Water-Resistant Sandpaper / Water-Abrasive Paper】 This sandpaper set can be used in dry grinding and wet grinding, and there is no problem if it gets wet by water! The ground debris will flow out with the water without clogging, and the debris will not scatter all over, which can effectively inhibit frictional heat. It enables you to complete grinding and lapping effortlessly, providing you with premium use experience!
【Wide Usage】 80#-400#: generally used for the grinding of hard, thick and rough metal, wood and wall. 600#-800#: products with low requirements can be directly grinded and formed. 1000#-1500#: used for the fine grinding of metal, furniture, jade and plastic. 2000#-3000#: used for the polishing of automobiles, manicure and handicrafts. 5000#-7000#: used for the polishing of all kinds of high-end products to achieve a mirror effect.
【Warranty & After-Sales Service】 Every piece is examined repeatedly before shipment to best ensure the quality of the product. If defects, damages or mismatch are found, please contact us! We will arrange alternatives for you. We hope that you are pleased with your purchases. Thank you for choosing us!
|
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
5 pack, 4.5" x 0.045", metal & stainless cutting wheel, 7/8" arbor, thin .045" wheel design for fast burr free cutting, proprietary aluminum oxide grain combination for aggressive cutting action, proprietary material mix ensures durable long life wheels, 2 full sheets of fiberglass for durability & safety, fast burr free cutting.
Is Discontinued By Manufacturer : No
Product Dimensions : 4.5 x 4.5 x 0.05 inches; 0.32 Ounces
Item model number : DW8062B5
Date First Available : July 21, 2011
Manufacturer : Dewalt
ASIN : B005B8LZCI
Country of Origin : Slovenia
Domestic Shipping: Item can be shipped within U.S.
International Shipping: This item can be shipped to select countries outside of the U.S. Learn More
Thin .045" wheel design for fast burr free cutting
Proprietary aluminum oxide grain combination for aggressive cutting action
Proprietary Material Mix ensures durable long life wheels
2 full sheets of fiberglass for durability and safety
Product Image may vary
Thin .045-Inch wheel design for fast burr free cutting
Proprietary aluminum oxide grain combination for aggressive cutting action
|
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
Product Description
✅PROFESSIONAL KNIFE SHARPENER STONE SET – Our complete knife sharpening stones set comes with high quality grit 400/1000 3000/8000 whetstone, 2x silicone base, non-slip bamboo base, angle guide, flattening stone and leather strop.
✅VERSATILE KNIFE SHARPENING Kit - This complete knife sharpening system can sharp ANY BLADE out there, such as kitchen knife sets, Chef knife, chopping knife, cleaver knife, butcher knife, paring knife, boning knife, steak knife, sushi knife, fruits knife, draw knife, bushcraft knife, ceramic knife, scissors, Chisel, razor, machete, santoku knife, pocket knife, hunting knife, utility knife,Victorinox knife, Japanese knife, Katana, BBQ knife,axe and swords.
✅ EASY & ECONOMICAL TO USE - No oil needed. Just make sure to soak the stone in water for 10-15 minutes before sharpening. The angle guide helps you to hold the knife on the correct angle which make sure the consistent pressure safely and easily applied during the sharpening process.
✅DOUBLE-SIDED LEATHER STROP – High quality double-sided leather honing strop is important for knife polishing and burr removing. With one side smooth, another side rough, which help you to align the perfect straight steel edge.
✅100% SATISFACTION SERVICE NO RISK - We're sure you're going to love FIRMLOC whetstone, try it out today without risk. If you're not satisfied with the sharpening stone for whatever reason, just contact us within 30 days for a hassle-free full refund, no questions asked.
|
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
Product Description
 Double-sided Sharpening Stone -- Material & Grit About White Corundum White corundum is made from industrial alumina powder, smelted at a high temperature of over 2000 degrees in an electric arc, and then cooled. It is crushed and shaped, magnetically separated to remove iron, and sieved into various particle sizes. Its texture is dense, high in hardness, and the particles form sharp corners. Shape, suitable for manufacturing ceramics, resin cemented abrasive tools, as well as grinding, polishing, sandblasting, precision casting. About Sharpening Stone Grit The sharpening stone is made of white corundum, and the grit represents the unit content of corundum particles. The higher the grit, the finer the texture, and the lower the grit, the coarser the texture. The low-grit whetstone is used for rough grinding, the high-grit is used for fine grinding.
 Versatility The double-sided sharpening stone can be used to sharpen any blade with a straight edge, such as kitchen knives, pocket knives, hunting knives, razors, chisels, or even axes. Sharpening Stone×1 Anti-slip Rubber Pad×1 Non-slip Bamboo Base×1 Angle Guide×1 Correction Stone×1 Manual×1
Warm Tips: To sharpen a good knife, first choose a good sharpening stone！
Do not wipe the mud of the stone, it can improve the effect of sharpening, and clean it after sharpening.
Serrated knives and ceramic knives are not suitable.
After use, the gray marks on the sharpening stone are metal shavings on the knife, which is normal.
Generally, first begin sharpening using the coarse grit and finish the process using the fine grit. Only the coarse grit can repair knife edges that are worn or damaged, and then use fine grit removes burrs and polishes the cutting edge.
Double-sided Design Coarse & Fine Collocation High-temperature Calcination
Angle Guide If the sharpening stone is used for the first time to control the angle of the tool grinding is not accurate, it is recommended to use an angle guide to assist in positioning the angle. The ceramic rod protection strips on both sides protect the whetstone from being scratched. The thickened pp plastic has a strong and durable clamping force. The angle between the control tool and the grinding table is about 15 degrees, which is suitable for most of the knifes on the market.
Correction Stone Before or during the grinding process, if the surface of the sharpening stone is found to be uneven, the correction stone should be used to smooth the surface of the sharpening stone in time. So as not to affect the tool grinding effect.
Anti-slip Rubber Pad Used to fix the sharpening stone, drain anti-skid grooves, high-efficiency anti-skid, save time and worry.
Non-slip Bamboo Base Custom-made special non-slip bamboo base, with special anti-slip rubber pad at the bottom, safer and more labor-saving when using, it is your good assistant for sharpening the knife.
Angle Guide
Correction Stone
Anti-slip Rubber Pad
Non-slip Bamboo Base
Step1: Soak in Water Before use, please soak the stone in water for 10-12 min to allow the stone to fully absorb water. When sharpening the knife, mud can be produced, which improves the friction, and at the same time, it has a cooling effect when friction generates heat.
Step 2: Coarse Grit 1000# First Take out the sharpening stone, first choose the side of coarse grit 1000# to grind, it can repair knife edges that are worn or damaged, avoid directly using high grit will scratch the sharpening stone, sharpening stone in turn damage your knife.
Step 3: Sharpening Angle The angle of sharpening is about 10-20° (the suitable angle for a bone cutting knife is about 30-35°). If you are unable to accurately grasp the angle of sharpening, it is recommended to use the included angle guide, which has an angle of about 15°.
Step 4: After Fine Grit 6000# After the gap of the tool is smoothed, use the side of grit 6000# to remove burrs and polishes the cutting edge. Please do not wipe off the mud that appears on the sharpening knife and stone. The mud can increase the friction and make the knife sharper.
【Perfect Design Whetstone Knife Sharpener】Double sided for both Grits both 1000 and 6000, choose the appropriate grit stone according to your knife blade. With a Beautiful Non-Slip Bamboo base, Corner Guide, Correction stone, Non-Slip Bamboo Base. Suitable for Chefs and Kitchen Knife.
【Easy to Use】Our grinding stone kits are designed to be friendly, simple and easy to install. You don’t need any expensive sharpening/honing oil And it can be easily cleaned with water.
【Blade Sharp Knife Whetstone】The sharping knife stone 2 in 1 water stone has coarse #1000 grit side to quickly Remove the dull edge & #6000 grit for honing. You can also use it as wet stone sharpening stone .Provides a very polished edge that will cut extremely well a as if it was new.
【Suitable for Various Tools】Our professional grade knife sharpener stone is highly durable & long lasting. The whetstone dimensions are 7" long, 2.28" wide, 1.1" thick and it suitable for all kinds of kitchen knives. Note: Please place both the whetstone and bamboo base in a dry environment and let them dry naturally.
【After-sales service】We provide a one-year warranty, if you have any questions, please feel free to contact us, we will help you solve the problem as soon as possible.
|
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol. Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents. This adhesive tape is NOT like normal adhesive tape that you can feel the adhesiveness when you use it. This tape need time and pressure to get into its adhesiveness. You have to press hard to one surface, than take out the red protective plastic and press the other surface part onto the Dark Grey part of the tape and leave that for 3 days to have the full bond strength. This is 3M product and we just sell whatever they have made. Customers are advise to search for more usage details from 3M web site.
1/2" (12mm) width x 15 Ft (5 yards) (Genuine 3M VHB 5952 Double Sides Foam (Dark Grey) Adhesive Tape
3M VHBTapes all-acrylic construction provides strength and durability in highly demanding applications
Dark gray, closed-cell acrylic foam carrier. Conformable. Good Adhesion to many painted surfaces,including powder coat
Adhesive type: Modified Acrylic Tape thickness w/o liner: 45 mils (1.1mm) Relative adhesion: HSE: High, LSE Med Solvent Resistance: High
50% strength of bond in 20 minutes, 90% strength of bond in 24 hours and 100% strength of bond after 72 hours
|
Price: $10.99 - $6.99
(as of Feb 04,2023 00:10:26 UTC - Details)
Sanding Detailer Kits make sanding those hard-to-reach areas easy making these the perfect precision sanding tool. The sticks are made of impact resistant plastic and have spring loaded tension to keep the sanding belts firmly in place or allow for quick belt rotating or changing. The tapered end can be used for intricate sanding while the flat side and rounded end add to the versatility of the sanding detailer. The tools and belts are color coded for easy grit identification making the sanding stick perfect for any job
Is Discontinued By Manufacturer : No
Package Dimensions : 6 x 2.7 x 0.8 inches; 2.2 Ounces
Date First Available : January 20, 2019
Manufacturer : Lumberton Industries
ASIN : B07MYLNT6W
24 Piece 1/4" Wide by 6 " Long Includes 4 color coded sticks and 5 belts each in 600 (15 Micron),800 (14 Micron),1000 (12 Micron) and 1200 (9 Micron) grits
New 3M Micro-Finish Film is a fast cutting abrasive for precise, uniform, close-tolerance finish
High strength polyester film backing and micron-graded aluminum oxide mineral resin is bonded for durability. The particles are electro- statically charged so all particle points are going in the same direction. This process increases the precision of the belt
This material is ideal for; tool and die work, gunsmithing, jewelry making, watch repair and medical devices. This material works well on both metal and plastic. The product is used dry.
Precision sanding tool perfect for intricate sanding
|
Reviews
There are no reviews yet.