Liven up your road trips and enjoy dancing colors with energetic music mode.

Discover scenes with smart, colorful and customizable car lights to keep your car fresh, fun, and vibrant.

Govee Interior Car Lights

Govee Exterior Car Lights

As a professional supplier of top-notch OEM&ODM vehicle backup Cameras , RAAYOO aims to only provide better backup cameras at a lower priice. We go to great lengths to research and improve our products all the time. And we believe that customer experience counts far more than short-term profits, so we make concerted efforts to design, manufacture, and improve our products and services in an innovative and responsible fashion.

RAAYOO L002 12V back up camera is a universal backup camera for cars,trucks,RVs,pickups with RCA video input connector, it support flush mount installation or bracket mount installation, hd high clear no distortion image, starlight level night vision, IP69 IP rating reliable waterproof level and horizontal 170 degrees wide view angle.

2 Important Wires/Loops Control Design:

RAAYOO L002 backup camera with 2 small wires/Loops (White and Green color).

*Cut the white loop to cancel the guidelines if you don’t need it.

*Cut the green loop: the mirror image (for rear view) at default will change to be non-mirror image (for front/side view).

Look backward, keep the green loop; look forward, cut the green loop.

Detailed instruction:

1. If you use it as a backup camera with guidelines, please keep both white and green wire/loop, because this camera is a back up. camera with guideline/parking line as DEFAULT;

2. If you use it as a backup camera without guidelines, please only cut the white loop, keep the green wire/loop;

3.If you use it as a front/side view camera with guidelines, please only cut the green loop, keep the white wire/loop;

4.If you use it as a front/side view camera without guidelines, please cut both white and green wire/loop;

*Please power off the vehicle and power on again after you cut the small loops, then the image should be correct.

*Note: if the green/white wire is cut, it can't connect again, so please make sure you want a reverse camera or forward looking camera before cut it.

1.Flush Mount Installation

2.Bracket Mount Installation

Notes:

*This RAAYOO L002 car camera is perfect for REAR, FRONT and SIDE view, please confirm if you use it as front/side view camera or rear view camera before install them, then cut the corresponding wire to get the correct image, don’t forget to power off the vehicle and power on again to covert the image successfully. Before routing, please test this car camera with your car radio, if there is no image on the screen, other than check the camera, please also check display setting as well. You can use another devices with RCA connector, such as TV to check if the camera works.

*If connect this RAAYOO L002 backup/front/side view camera to a FACTORY RADIO, please separately order a suited Harness & Programmer to complete installation, because different RADIO needs different Harness & Programmer to work together, and also check if your radio support RCA video input.

* If your head unit with a reverse triggering wire, normally it is a purple/white, blue/white or pink color wire, please find it and connect it with the extension wire's red triggering wire well(small short red wire at the end of RCA/AV video cable).

*The working principle of the vehicle backup camera is very simple, it will transmit the video signal to your monitor the moment it gets power. When your monitor cannot display the image, please make sure whether you get the power to the camera successfully, and also make sure that the monitor receives the power and the video signal. If we get power to the backup camera from the back lights, the backup camera only works when you're backing up, so the backup camera will only provide a video signal to your monitor when you're backing up, and your monitor will show the rear view image when you're in reverse. If you get constant power to your camera, it will work all the time.

*If the camera is mounted upside down, the guidelines on image will be upside down too, please rotate the camera to get the correct installation direction.

*Guideline is for reference only, please use the mirrors for position when backup.

Get a Better View Angle

Car bumpers is a good postion for flush mount installation, it is easy to drill a hole with drilling bit. Before drilling a hole, please seriously check and test to find where is the best position to mount this camera If you want to get a perfect view angle, please rotate the middle housing part of the camera (maximum 360 degrees) or move the bracket (maximum 90 degrees) to get the best view angle.

With advanced night vision technology, it is easy to see things clearly in the dark, because its accurate recognition of lawns, stones, lakes, so it will be a reliable assitant at night. It also has clear and true color image at daytime, you can see the true color of the things you pass by.

It is difficult to park without a rear view camera even though you are an experienced driver, we cannot see all of the area behind of our vehicles. With this 170° large Viewing angle reverse camera, you can see clearly everything at the back of your car and quickly and safely park you car well.

L002 backup camera supports Normal and Mirror image. You can install it in front/rear of your car to avoid any blind spot, the default is mirror image for rear view（keep the green wire).

Note: if the green wire is cut, it can't connect again, so please make sure you want a rear view camera or front view camera before you cut it.

RAAYOO L002 flush or bracket mount front/side/rear view camera adopt the 170° wide viewing camera lens, effectively help you see more area where your rear view mirror cannot reach, See wider, More safer.

Works with your head units or aftermarket LCD/TFT displays with standard RCA video input, 12V working Voltage ONLY,Please check if your display support RCA video input before make a order.

RAAYOO L002 flush or bracket mount bind spot vehicle backup camera adopt 2020 latest 6pcs all-glass large aperture lens to provide HD resolution clear and true color image image for your vehicle without delay, No purple issue.

Easy to Install

1.Find a proper location to mount this reverse camera.

2.Connect the power wire of camera to your reversing light,postive to reversing light+,negative to revesing light - or ground.

3.Connect the video cable of camera to the head unit of your vehilce. Note:(1)Please test the backup camera before rounting the video cable(2) Connect trigger A with B if your head unit with a trigger wire A, if not, no need connect them.

4.Start the vehicle and gear on reverse to test the camera.

Above is the installation instruction for backup camera, you need to cut the green thin wire and white thin wire if you want to install it as a front view camera.

3 Control Methods:

Use Govee Home App to choose from over 16 million colors and 7 scene modes to easily customize your car interior just the way you like it.

The control box can help you control the car lights more conveniently. Push to button to turn on/off the led lights and change the colors of light.

With the remote you can adjust brightness and speed, choose colors, change scene modes, turn on music mode directly.

Drive Auto’s Ultimate Trunk Organizer

Keeping your car clean has never been easier with Drive Auto’s Ultimate Trunk Organizers. Our heavy duty organizer is the easiest, most convenient way to de-junk your car. This versatile, collapsible organizer is engineered to keeps items from rolling around in your trunk. With first of its kind steel tipped tie-down straps that latch almost anywhere , it fits securely in your vehicle anywhere you need it.

Why choose our digital wireless backup camera 5inch monitor kit?