In Stock

Double-sided Sharpening Stone 1000/6000, with Corner Guide, Correction stone, Non-Slip Bamboo Base, Dual-Grit Wet Sharpener Anti-slip design Wet Sharpener

$17.99

Description

Price: $17.99
(as of Jun 25,2022 23:39:41 UTC – Details)


Product Description

11

Double-sided Sharpening Stone — Material & Grit

About White Corundum

White corundum is made from industrial alumina powder, smelted at a high temperature of over 2000 degrees in an electric arc, and then cooled. It is crushed and shaped, magnetically separated to remove iron, and sieved into various particle sizes. Its texture is dense, high in hardness, and the particles form sharp corners. Shape, suitable for manufacturing ceramics, resin cemented abrasive tools, as well as grinding, polishing, sandblasting, precision casting.

About Sharpening Stone Grit

The sharpening stone is made of white corundum, and the grit represents the unit content of corundum particles. The higher the grit, the finer the texture, and the lower the grit, the coarser the texture. The low-grit whetstone is used for rough grinding, the high-grit is used for fine grinding.

2-12-1

2-22-2 Versatility

The double-sided sharpening stone can be used to sharpen any blade with a straight edge, such as kitchen knives, pocket knives, hunting knives, razors, chisels, or even axes.

Sharpening Stone×1 Anti-slip Rubber Pad×1 Non-slip Bamboo Base×1 Angle Guide×1 Correction Stone×1 Manual×1

Warm Tips:

To sharpen a good knife, first choose a good sharpening stone!

Do not wipe the mud of the stone, it can improve the effect of sharpening, and clean it after sharpening.
Serrated knives and ceramic knives are not suitable.
After use, the gray marks on the sharpening stone are metal shavings on the knife, which is normal.
Generally, first begin sharpening using the coarse grit and finish the process using the fine grit. Only the coarse grit can repair knife edges that are worn or damaged, and then use fine grit removes burrs and polishes the cutting edge.

Double-sided Design Coarse & Fine Collocation High-temperature Calcination

3-13-1

Angle Guide

If the sharpening stone is used for the first time to control the angle of the tool grinding is not accurate, it is recommended to use an angle guide to assist in positioning the angle. The ceramic rod protection strips on both sides protect the whetstone from being scratched. The thickened pp plastic has a strong and durable clamping force. The angle between the control tool and the grinding table is about 15 degrees, which is suitable for most of the knifes on the market.

3-23-2

Correction Stone

Before or during the grinding process, if the surface of the sharpening stone is found to be uneven, the correction stone should be used to smooth the surface of the sharpening stone in time. So as not to affect the tool grinding effect.

3-33-3

Anti-slip Rubber Pad

Used to fix the sharpening stone, drain anti-skid grooves, high-efficiency anti-skid, save time and worry.

3-43-4

Non-slip Bamboo Base

Custom-made special non-slip bamboo base, with special anti-slip rubber pad at the bottom, safer and more labor-saving when using, it is your good assistant for sharpening the knife.

3-13-1

Angle Guide

3-23-2

Correction Stone

3-33-3

Anti-slip Rubber Pad

3-43-4

Non-slip Bamboo Base

4-1

4-1

4-3

4-3

4-2

4-2

4-4

4-4

Step1: Soak in Water

Before use, please soak the stone in water for 10-12 min to allow the stone to fully absorb water. When sharpening the knife, mud can be produced, which improves the friction, and at the same time, it has a cooling effect when friction generates heat.

Step 2: Coarse Grit 1000# First

Take out the sharpening stone, first choose the side of coarse grit 1000# to grind, it can repair knife edges that are worn or damaged, avoid directly using high grit will scratch the sharpening stone, sharpening stone in turn damage your knife.

Step 3: Sharpening Angle

The angle of sharpening is about 10-20° (the suitable angle for a bone cutting knife is about 30-35°). If you are unable to accurately grasp the angle of sharpening, it is recommended to use the included angle guide, which has an angle of about 15°.

Step 4: After Fine Grit 6000#

After the gap of the tool is smoothed, use the side of grit 6000# to remove burrs and polishes the cutting edge. Please do not wipe off the mud that appears on the sharpening knife and stone. The mud can increase the friction and make the knife sharper.

55

【Perfect Design Whetstone Knife Sharpener】Double sided for both Grits both 1000 and 6000, choose the appropriate grit stone according to your knife blade. With a Beautiful Non-Slip Bamboo base, Corner Guide, Correction stone, Non-Slip Bamboo Base. Suitable for Chefs and Kitchen Knife.
【Easy to Use】Our grinding stone kits are designed to be friendly, simple and easy to install. You don’t need any expensive sharpening/honing oil And it can be easily cleaned with water.
【Blade Sharp Knife Whetstone】The sharping knife stone 2 in 1 water stone has coarse #1000 grit side to quickly Remove the dull edge & #6000 grit for honing. You can also use it as wet stone sharpening stone .Provides a very polished edge that will cut extremely well a as if it was new.
【Suitable for Various Tools】Our professional grade knife sharpener stone is highly durable & long lasting. The whetstone dimensions are 7″ long, 2.28″ wide, 1.1″ thick and it suitable for all kinds of kitchen knives. Note: Please place both the whetstone and bamboo base in a dry environment and let them dry naturally.
【After-sales service】We provide a one-year warranty, if you have any questions, please feel free to contact us, we will help you solve the problem as soon as possible.

Reviews

There are no reviews yet.

Be the first to review “Double-sided Sharpening Stone 1000/6000, with Corner Guide, Correction stone, Non-Slip Bamboo Base, Dual-Grit Wet Sharpener Anti-slip design Wet Sharpener”

Your email address will not be published.